RZ400 Efi Tec 5W20
RZ400 5W20 engine oil has an advanced formulation that lubricates, cleans, protects and optimizes fuel consumption. It has been developed to offer an excellent level of protection against wear and deposits and to perform optimally under the demanding conditions of modern engines. It offers optimal flowability at low temperature and optimal viscosity stability at high temperature. The low viscosity also reduces friction to a minimum and saves fuel.
Compatibility:
- API SN
Advantages:
- Small deposits and wear
- better properties than API SM referring resistance to aging
- stability of viscosity
- fuel saving
- low exhaust gas emission
- engine cleanliness, piston cleanliness
- flexible maintenance intervals
RZ400 Efi Tec 5W30
RZ400 5W30 has an advanced formula that lubricates, cleans and protects engines. It is designed to provide an excellent level of protection against wear, deposit formation and superior performance under the most demanding conditions. It has great fluidity at low temperature and viscosity stability at high temperature. It can also reduce oil consumption and emissions.
Compatibility:
- API SP
- ILSAC GF-6
- dexos 1 Gen. 2
- Ford WSS-M2C961-A1
- Ford WSS-M2C946-A
Advantages:
- Low-speed pre-ignition prevention
- Small deposits and wear
- Better properties than API SM referring resistance to aging
- Stability of viscosity
- Fuel saving
- Low exhaust gas emission
- Engine cleanliness
- Piston cleanliness
- Flexible maintenance intervals
RZ400 Efi Tec 5W40
RZ400 5W40 is a high-quality engine oil based on HC synthesis and was developed to meet the needs of modern petrol and diesel vehicles. It is suitable for vehicles with gasoline and diesel engines, with and without turbocharging, and is used for vehicles without extended maintenance intervals. It enables a wide range of uses and under all operating conditions.
Compatibility:
- ACEA A3/B4
- API SN/CF
- MB 229.3
- PSA B71 2296
- Renault RN 0700/0710
- VW 502 00/505 00
Advantages:
- suitable for turbocharged engines
- Prevention of adhesion, lacquering and coking
- Safer year-round operation
- Good cold-starting properties and rapid engine lubrication
- Stable lubricating film, even with hot oil and under excessive loads
- Low oil consumption
- High level of oxidation protection
- Proper functioning of hydraulic tappets
RZ400 10W40
RZ400 10W40 is a high-quality engine oil based on HC synthesis for passenger cars and light commercial vehicles with excellent protection against wear, corrosion, oil oxidation, piston deposits and sludge. It offers superior temperature stability and oxidation resistance. It is used in modern multi-cylinder, multi-valve, suction, compressor and turbo engines.
Compatibility:
- ACEA A3 / B4
- API SL / CF
- MB 229.1
- VW 501 01 / 505 00
- Fiat 9.55535-G2 / D2
Advantages:
- Eminently suitable for turbocharged engines
- Prevention of adhesion, lacquering and coking of cylinders, pistons, valves and turbochargers in a reliable manner
- Safer year-round operation due to outstanding viscosity-temperature behaviour and high shear stability
- Stable lubricating film, even with hot oil and under excessive loads
- Very low oil consumption
- High level of oxidation protection by means of selected HC synthetic oils and special additives
- Reliable protection against ‘black sludge’
- Proper functioning of hydraulic tappets (hydraulic valve clearance compensation)
RZ400 5W20
RZ400 5W20 engine oil has an advanced formulation that lubricates, cleans, protects and optimizes fuel consumption. It has been developed to offer an excellent level of protection against wear and deposits and to perform optimally under the demanding conditions of modern engines. It offers optimal flowability at low temperature and optimal viscosity stability at high temperature. The low viscosity also reduces friction to a minimum and saves fuel.
Compatibility:
- API SN
Advantages:
- Small deposits and wear
- better properties than API SM referring resistance to aging
- stability of viscosity
- fuel saving
- low exhaust gas emission
- engine cleanliness, piston cleanliness
- flexible maintenance intervals
RZ400 5W30
RZ400 5W30 has an advanced formula that lubricates, cleans and protects engines. It is designed to provide an excellent level of protection against wear, deposit formation and superior performance under the most demanding conditions. It has great fluidity at low temperature and viscosity stability at high temperature. It can also reduce oil consumption and emissions.
Compatibility:
- API SP
- ILSAC GF-6
- dexos 1 Gen. 2
- Ford WSS-M2C961-A1
- Ford WSS-M2C946-A
Advantages:
- Low-speed pre-ignition prevention
- Small deposits and wear
- Better properties than API SM referring resistance to aging
- Stability of viscosity
- Fuel saving
- Low exhaust gas emission
- Engine cleanliness
- Piston cleanliness
- Flexible maintenance intervals
RZ400 5W40
RZ400 5W40 is a high-quality engine oil based on HC synthesis and was developed to meet the needs of modern petrol and diesel vehicles. It is suitable for vehicles with gasoline and diesel engines, with and without turbocharging, and is used for vehicles without extended maintenance intervals. It enables a wide range of uses and under all operating conditions.
Compatibility:
- ACEA A3/B4
- API SN/CF
- MB 229.3
- PSA B71 2296
- Renault RN 0700/0710
- VW 502 00/505 00
Advantages:
- suitable for turbocharged engines
- Prevention of adhesion, lacquering and coking
- Safer year-round operation
- Good cold-starting properties and rapid engine lubrication
- Stable lubricating film, even with hot oil and under excessive loads
- Low oil consumption
- High level of oxidation protection
- Proper functioning of hydraulic tappets
RZ400 Efi Tec 10W40
RZ400 10W40 is a high-quality engine oil based on HC synthesis for passenger cars and light commercial vehicles with excellent protection against wear, corrosion, oil oxidation, piston deposits and sludge. It offers superior temperature stability and oxidation resistance. It is used in modern multi-cylinder, multi-valve, suction, compressor and turbo engines.
Compatibility:
- ACEA A3 / B4
- API SL / CF
- MB 229.1
- VW 501 01 / 505 00
- Fiat 9.55535-G2 / D2
Advantages:
- Eminently suitable for turbocharged engines
- Prevention of adhesion, lacquering and coking of cylinders, pistons, valves and turbochargers in a reliable manner
- Safer year-round operation due to outstanding viscosity-temperature behaviour and high shear stability
- Stable lubricating film, even with hot oil and under excessive loads
- Very low oil consumption
- High level of oxidation protection by means of selected HC synthetic oils and special additives
- Reliable protection against ‘black sludge’
- Proper functioning of hydraulic tappets (hydraulic valve clearance compensation)
RZ400 15W40
The RZ400 15W40 is heavy-duty diesel engine oil formulated for long drain mixed-fleet of diesel and gasoline engines. It has excellent soot dispersion and anti-wear control while providing outstanding protection against wear and corrosion. Its superior formula prevents the harmful build-up of sludge and protects against varnish formation, with superior anti-oxidation characteristics and high-temperature stability.
Compatibility:
ACEA A3/B4
API SL/CF
Fiat 9.55535-G2/D2
MB 229.1
VW 501 01/505 00
RZ400 20W50
The RZ400 20W50 is specially formulated to provide superior protection in the most demanding applications. It’s developed for all modern low-emission diesel engines, turbocharged or not. It meets the requirements of ACEA E7 heavy-duty diesel oil and is highly resistant to wear and corrosion. It keeps the engine clean by minimizing deposit formation. It has outstanding control of high temperature deposits and excellent soot control. It has excellent anti oxidation, anti-rust and anti-foam properties. It’s ideal for use in high-stress vehicles such as trucks, buses, construction machinery, farm machinery, bulldozers, generators and marine machinery.
Compatibility:
ACEA E7
ACEA A3 / B4
API CI-4 / SL
GLOBAL DHD-1
JASO DH-1
Allison C-4
CAT ECF-1-a / ECF-2
Cummins CES 20071 / -72 / -75 / -76 / -77 / -78
Deutz DQC Ⅲ-05
Mack EO-M PLUS
MAN 3275
MB 228.3 / 229.1
MTU Typ 2
Renault RLD-2
Volvo VDS-3
RZ400 20W50 c
The RZ400 20W50c is specially formulated to provide superior protection and performance in the most demanding applications. It is super high performance diesel (SHPD) for heavy-duty, low-emission diesel engines. It has excellent dispersion and oxidation resistance to prevent soot accumulation and filter blockage. It has excellent anti-rust, anti-corrosion and anti-foam properties, as well as good shearing stability and wear-resistance. It’s ideal for use in engines turbocharged or not and high-stress vehicles subject to stop-and-go driving, short trips, high temperatures and frequent trailer pulling such as trucks, bulldozers, buses, farm machinery, construction machinery and ship engines.
Compatibility:
ACEA E7
ACEA A3 / B4
API CI-4
API SL
JASO DH-1
MB 228.3
MB 229.1
MAN 3275-1
Cummins CES 20076/77/78
Deutz DQC II-10
Detroit Diesel DDC 93K215
RZ400 20W50 LQ
The RZ400 20W50LQ is super high performance diesel (SHPD) satisfying the requirement of low emission from many European, American and Japanese diesel engines. Its low ash characteristic provides outstanding high-temperature carbon deposit control and soot control. It has excellent anti-wear, anti-corrosion, anti-rust and anti-foam properties. It’s ideal for use in engines turbocharged or not and high-stress vehicles subject to stop-and-go driving, short trips, high temperatures and frequent trailer pulling such as trucks, bulldozers, buses, farm machinery, construction machinery and ship engines.
Compatibility:
API CH4 / SJ
ACEA E7
GLOBAL DHD-1
JASO DH-1
Allison C-4
CAT ECF-1-a / ECF-2
Cummins CES 20071 / -72 / -75 / -76 / -77 / -78
Deutz DQC III-05
Mack EO-MPLUS
MAN 3275
MB 228.3 / 229.1
MTU Typ 2
Renault RLD-2
Volvo VDS-3