Heomo E20 Engine Flush
Application:
- Suitable for all types of engine lubricating systems.
- Removes carbon in the piston ring slot, restores the piston ring elasticity, reduces the cylinder wall leakage and protects the cylinder wall.
- Cleans and lubricates effectively, prevents metal part damage.
- Effectively removes colloid, sludge and carbon accumulated in the internal engine components
- Fast and neutral cleaning efficiency. Protects sealing material, gasket and rubber impeller.
- Dissolves harmful sediment and neutralizes acidic material.
- Improves engine performance and helps to restore cylinder pressure.
- Improves fuel economy and reduces emissions.
- Extends engine service life.
Package:
300ml/bottle 24 bottles/carton
Suggestion:
- A bottle of 300ml is suitable for 5L oil. Directly add into the old oil before oil change. Start the engine and idle for 20 minutes before discharging the waste oil, or clean by using the special cleaning equipment of the lubricating system.
- Follow the manufacturer’s recommendations and adjust the usage cycle according to your own use. It is recommended to use every 5000 kilometers or every oil change.
Heomo E23 Carbon Remover for Piston Ring
Application:
- Suitable for all types of engine lubricating systems.
- Containing imported polymer detergent and carbon dissolving agent, it can fully dissolve carbon and sludge.
- It effectively removes the carbon accumulation in the oil return hole of the piston ring, restores the elasticity of the piston ring, restores the cylinder pressure, alleviates oil consumption, and treats the problem of burning oil in vehicles.
- Alleviates problems such as poor start and unsteady idle speed.
- Reduces fuel consumption and quickly improves acceleration performance.
- Mitigates and prevents knock.
- No damage to the piston ring coating and no corrosion to the oil pan.
Package:
300ml/bottle 24 bottles/carton
Suggestion:
- Every 5000km or every time when oil is changed. Directly add into the old engine oil and idle for 2-3 hours before draining the old oil. A bottle(300ml) is suitable for 5 litres of oil. It is recommended to replace the oil filter element when first used. For vehicles with serious sludge and carbon accumulation of, please check the oil filter and repeat to clean to reach better effect.
- This product can dissolve with any type of oil, and is effective for problems such as stuck lag caused by carbon accumulation of piston ring and increased oil consumption. This product is strictly prohibited to be used in vehicles with cylinder scoring. Do not drive on the highway or with extreme speed after using this product.
Heomo E26 Engine Cleaning Oil
Application:
- Suitable for all types of engine lubricating systems.
- It can quickly remove all kinds of sludge, gum, carbon accumulation and oxidation sediment in the engine, restore the clean state of the engine interior, reduce the pollution of new oil, prolong its service life, reduce engine wear and prolong engine life.
Package:
4L/bottle 5 bottles/carton
Suggestion:
Every 20000km or every time when oil is
changed.
Usage direction:
- Discharge the old oil and add the same amount of the cleaning oil. Idle for 10-15 minutes and discharge the cleaning agent. Replace the new oil filter and add the new oil.
- Use the professional cleaning equipment of lubricating system by the way of cycle cleaning.
Discharge the old oil, connect the equipment and the vehicle and add the same amount of cleaning oil into the engine. Start the engine, idle for 10 minutes for cycle cleaning. Discharge the cleaning agent, replace the oil filter and add new oil.
This product cannot be used as engine oil. Do not mix with other models.
Heomo E30 Engine Care Protector
Application:
- Suitable for all gasoline, diesel and liquefied petroleum gas engines with or without turbocharger.
- Effectively reduces engine wear, enhances the lubricating effect and cleaning state of engine oil, reduces the formation of sludge and carbon deposits.
- Enables the engine to run more smoothly.
- Helps to reduce engine noise.
- Protects against rust and corrosion.
- Reduces cold start wear and conditions metal surfaces.
- Prevents oxidation and premature sickening of the oil.
- Extends oil lubrication and cleaning performance and saves fuel consumption.
- Compatible with all mineral and synthetic oils, suitable for conventional and low sulfur and ash applications.
The active component of E30 can directly penetrate the lubricating oil film to form a protective layer on the metal surface, blocking water and other impurities outside.
Package:
300ml/bottle 24 bottles/carton
Usage direction:
Add to engine oil and mix with all types of oil. A bottle of 300ml can be used for 5 liters of oil. Not recommended for use on hybrid models. It will not plug the filter, harmless to three-way catalytic converter. Follow the manufacturer’s recommendations and adjust the service cycle according to your own use. It is recommended to use every 10000 km or every oil change.
RZ400 Efi Tec 5W20
RZ400 5W20 engine oil has an advanced formulation that lubricates, cleans, protects and optimizes fuel consumption. It has been developed to offer an excellent level of protection against wear and deposits and to perform optimally under the demanding conditions of modern engines. It offers optimal flowability at low temperature and optimal viscosity stability at high temperature. The low viscosity also reduces friction to a minimum and saves fuel.
Compatibility:
- API SN
Advantages:
- Small deposits and wear
- better properties than API SM referring resistance to aging
- stability of viscosity
- fuel saving
- low exhaust gas emission
- engine cleanliness, piston cleanliness
- flexible maintenance intervals
RZ400 Efi Tec 5W30
RZ400 5W30 has an advanced formula that lubricates, cleans and protects engines. It is designed to provide an excellent level of protection against wear, deposit formation and superior performance under the most demanding conditions. It has great fluidity at low temperature and viscosity stability at high temperature. It can also reduce oil consumption and emissions.
Compatibility:
- API SP
- ILSAC GF-6
- dexos 1 Gen. 2
- Ford WSS-M2C961-A1
- Ford WSS-M2C946-A
Advantages:
- Low-speed pre-ignition prevention
- Small deposits and wear
- Better properties than API SM referring resistance to aging
- Stability of viscosity
- Fuel saving
- Low exhaust gas emission
- Engine cleanliness
- Piston cleanliness
- Flexible maintenance intervals
RZ400 Efi Tec 5W40
RZ400 5W40 is a high-quality engine oil based on HC synthesis and was developed to meet the needs of modern petrol and diesel vehicles. It is suitable for vehicles with gasoline and diesel engines, with and without turbocharging, and is used for vehicles without extended maintenance intervals. It enables a wide range of uses and under all operating conditions.
Compatibility:
- ACEA A3/B4
- API SN/CF
- MB 229.3
- PSA B71 2296
- Renault RN 0700/0710
- VW 502 00/505 00
Advantages:
- suitable for turbocharged engines
- Prevention of adhesion, lacquering and coking
- Safer year-round operation
- Good cold-starting properties and rapid engine lubrication
- Stable lubricating film, even with hot oil and under excessive loads
- Low oil consumption
- High level of oxidation protection
- Proper functioning of hydraulic tappets
RZ400 10W40
RZ400 10W40 is a high-quality engine oil based on HC synthesis for passenger cars and light commercial vehicles with excellent protection against wear, corrosion, oil oxidation, piston deposits and sludge. It offers superior temperature stability and oxidation resistance. It is used in modern multi-cylinder, multi-valve, suction, compressor and turbo engines.
Compatibility:
- ACEA A3 / B4
- API SL / CF
- MB 229.1
- VW 501 01 / 505 00
- Fiat 9.55535-G2 / D2
Advantages:
- Eminently suitable for turbocharged engines
- Prevention of adhesion, lacquering and coking of cylinders, pistons, valves and turbochargers in a reliable manner
- Safer year-round operation due to outstanding viscosity-temperature behaviour and high shear stability
- Stable lubricating film, even with hot oil and under excessive loads
- Very low oil consumption
- High level of oxidation protection by means of selected HC synthetic oils and special additives
- Reliable protection against ‘black sludge’
- Proper functioning of hydraulic tappets (hydraulic valve clearance compensation)
RZ400 5W20
RZ400 5W20 engine oil has an advanced formulation that lubricates, cleans, protects and optimizes fuel consumption. It has been developed to offer an excellent level of protection against wear and deposits and to perform optimally under the demanding conditions of modern engines. It offers optimal flowability at low temperature and optimal viscosity stability at high temperature. The low viscosity also reduces friction to a minimum and saves fuel.
Compatibility:
- API SN
Advantages:
- Small deposits and wear
- better properties than API SM referring resistance to aging
- stability of viscosity
- fuel saving
- low exhaust gas emission
- engine cleanliness, piston cleanliness
- flexible maintenance intervals
RZ400 5W30
RZ400 5W30 has an advanced formula that lubricates, cleans and protects engines. It is designed to provide an excellent level of protection against wear, deposit formation and superior performance under the most demanding conditions. It has great fluidity at low temperature and viscosity stability at high temperature. It can also reduce oil consumption and emissions.
Compatibility:
- API SP
- ILSAC GF-6
- dexos 1 Gen. 2
- Ford WSS-M2C961-A1
- Ford WSS-M2C946-A
Advantages:
- Low-speed pre-ignition prevention
- Small deposits and wear
- Better properties than API SM referring resistance to aging
- Stability of viscosity
- Fuel saving
- Low exhaust gas emission
- Engine cleanliness
- Piston cleanliness
- Flexible maintenance intervals
RZ400 5W40
RZ400 5W40 is a high-quality engine oil based on HC synthesis and was developed to meet the needs of modern petrol and diesel vehicles. It is suitable for vehicles with gasoline and diesel engines, with and without turbocharging, and is used for vehicles without extended maintenance intervals. It enables a wide range of uses and under all operating conditions.
Compatibility:
- ACEA A3/B4
- API SN/CF
- MB 229.3
- PSA B71 2296
- Renault RN 0700/0710
- VW 502 00/505 00
Advantages:
- suitable for turbocharged engines
- Prevention of adhesion, lacquering and coking
- Safer year-round operation
- Good cold-starting properties and rapid engine lubrication
- Stable lubricating film, even with hot oil and under excessive loads
- Low oil consumption
- High level of oxidation protection
- Proper functioning of hydraulic tappets
RZ400 Efi Tec 10W40
RZ400 10W40 is a high-quality engine oil based on HC synthesis for passenger cars and light commercial vehicles with excellent protection against wear, corrosion, oil oxidation, piston deposits and sludge. It offers superior temperature stability and oxidation resistance. It is used in modern multi-cylinder, multi-valve, suction, compressor and turbo engines.
Compatibility:
- ACEA A3 / B4
- API SL / CF
- MB 229.1
- VW 501 01 / 505 00
- Fiat 9.55535-G2 / D2
Advantages:
- Eminently suitable for turbocharged engines
- Prevention of adhesion, lacquering and coking of cylinders, pistons, valves and turbochargers in a reliable manner
- Safer year-round operation due to outstanding viscosity-temperature behaviour and high shear stability
- Stable lubricating film, even with hot oil and under excessive loads
- Very low oil consumption
- High level of oxidation protection by means of selected HC synthetic oils and special additives
- Reliable protection against ‘black sludge’
- Proper functioning of hydraulic tappets (hydraulic valve clearance compensation)