Application:

• Suitable for all types of engine lubricating systems.
• Removes carbon in the piston ring slot, restores the piston ring elasticity, reduces the cylinder wall leakage and protects the cylinder wall.
• Cleans and lubricates effectively, prevents metal part damage.
• Effectively removes colloid, sludge and carbon accumulated in the internal engine components
• Fast and neutral cleaning efficiency. Protects sealing material, gasket and rubber impeller.
• Dissolves harmful sediment and neutralizes acidic material.
• Improves engine performance and helps to restore cylinder pressure.
• Improves fuel economy and reduces emissions.
• Extends engine service life.

Package:

300ml/bottle 24 bottles/carton

Suggestion:

• A bottle of 300ml is suitable for 5L oil. Directly add into the old oil before oil change. Start the engine and idle for 20 minutes before discharging the waste oil, or clean by using the special cleaning equipment of the lubricating system.
• Follow the manufacturer’s recommendations and adjust the usage cycle according to your own use. It is recommended to use every 5000 kilometers or every oil change.

Application:

• Suitable for all types of engine lubricating systems.
• Containing imported polymer detergent and carbon dissolving agent, it can fully dissolve carbon and sludge.
• It effectively removes the carbon accumulation in the oil return hole of the piston ring, restores the elasticity of the piston ring, restores the cylinder pressure, alleviates oil consumption, and treats the problem of burning oil in vehicles.
• Alleviates problems such as poor start and unsteady idle speed.
• Reduces fuel consumption and quickly improves acceleration performance.
• Mitigates and prevents knock.
• No damage to the piston ring coating and no corrosion to the oil pan.

Package:

300ml/bottle 24 bottles/carton

Suggestion:

• Every 5000km or every time when oil is changed. Directly add into the old engine oil and idle for 2-3 hours before draining the old oil. A bottle(300ml) is suitable for 5 litres of oil. It is recommended to replace the oil filter element when first used. For vehicles with serious sludge and carbon accumulation of, please check the oil filter and repeat to clean to reach better effect.
• This product can dissolve with any type of oil, and is effective for problems such as stuck lag caused by carbon accumulation of piston ring and increased oil consumption. This product is strictly prohibited to be used in vehicles with cylinder scoring. Do not drive on the highway or with extreme speed after using this product.

Application:

• Suitable for gasoline, diesel and liquefied petroleum gas engines with or without turbochargers.
• Also applicable to hybrid models and models with National 6 emission
  standards.
• Specifically developed to reduce friction and wear, it can form a high bearing lubricating protective film on all friction and sliding surfaces inside the engine, reducing engine wear and improving oil viscosity, providing maximum protection under high engine load.
• It has sealing effect on combustion chamber and reduces wear in turbocharger.
• Reduces friction noise, reduces fuel consumption and oil consumption, quickly restores the original power.

Package:

300ml/bottle 24 bottles/carton

Suggestion:

Add into to engine oil and mix with all types of oil. A bottle of 300ml can be used for 3-6L oil. It will not plug the filter and is harmless to three-way catalytic converter.

Follow the manufacturer’s recommendations and adjust the service cycle according to your own use. It is recommended to use every oil change.

Application:

• Suitable for cleaning the intake system of gasoline and diesel engines, but also for cleaning diesel particulate filters and turbochargers.
• Removes carbon accumulation, improves air fuel ratio, improves combustion performance and reduces harmful exhaust emissions.
• Increases the power of the engine. Restores power and improves fuel economy.

Package:

400ml/bottle 24 bottles/carton

Suggestion:

Operated by professional technicians.

• Intake system cleaning:
  Use a long hose to spray half of the cleaning agent into the intake manifold. Slowly pull out the hose so that the foam covers the entire intake line. Wait about 20-30 minutes before starting the engine. Run the engine at 3000rpm for about 5km or for 10 minutes and stop for 2 minutes. Then check that the intake system is clean. Wipe away any remaining sediment. Repeat the operation with the remaining half bottle of the cleaner.
• DPF Cleaning:
  Remove DPF pressure sensor. Use a long hose to spray the entire bottle of cleaner through the opening of the pressure sensor. Wait 20-30 minutes, then start the engine and run at 3000rpm for 10 minutes or 5-10 km.
• Turbocharger cleaning:
  Spray half bottle of cleaner into the turbocharger impeller and turn the VTG impeller manually. Wait 20-30 minutes and repeat with the other half bottle of cleaner.  The use cycle should comply with the manufacturer’s recommendations and adjust according to your own use. It is recommended to use once every 20,000 kilometers.